Conische moer anode hexagonaal 22-25mm

Schrijf review en help anderen

ZINC, compliant with MIL-A-18001K

Artikelnummer: OD A38252

Op bestelling
Verwachtte verzending tussen maandag 30 dec en dinsdag 31 dec .*

€ 10,44

Aantal:

Voeg toe aan productvergelijking

Details

Tips & tricks

Standard anodes protect elements common to all boats (shafts, hull...).
Some anode models are specific to a motor or thruster brand (always refer to the manufacturer’s recommendations).

INSTALLATION

The anode must be in direct contact with the metal it protects : never paint around an anode or the anode itself.
Do not fit magnesium anodes on wooden hulls as it would deteriorate the boat structure.

WHEN SHOULD ANODES BE REPLACED ?

Anodes deterioration rate may fluctuate according to the mooring area, water salinity, PH and temperature, potential electrical failure on board, and of course, the quality of the anodes themselves.
A good benchmark for replacement is when the anode is 70-80 % dissolved. Plastimo recommends to replace anodes every year when doing the boat antifouling/launching. In all cases, anodes deterioration should always be watched carefully together with the condition of the metal parts they protect.

IMPORTANT :

On the opposite, anodes may dissolve quickly if they are bad quality or if there is an electrical failure on board (check the batteries, the right earth connection to the dock, the proper cathodic protection of your marina neighbours, ... ).

Models

Ref.	Model	Shaft Ø	Ø A	Ø B	C	H	Weight
38248	Conical	30 mm	44 mm	21 mm	32 mm	52 mm	0,290 kg
38249	Conical	35 mm	44 mm	24 mm	37 mm	52 mm	0,4 kg
38250	Conical	40 mm	49 mm	27 mm	42 mm	65 mm	0,540 kg
38251	Conical	45 mm	59 mm	31 mm	48 mm	74 mm	0,9 kg
420250	Conical	50 mm	73 mm	39 mm	57 mm	84 mm	1,150 kg
420265	Conical	55 mm	73 mm	42 mm	65 mm	85 mm	1,120 kg
401234	Conical	60 mm	82 mm	46 mm	71 mm	95 mm	1,7 kg
38252	Hexagonal	22-25 mm	32 mm	26 mm	23 mm	39 mm	0,135 kg
38253	Hexagonal	30 mm	41 mm	30 mm	27 mm	57 mm	0.270 kg
38254	Hexagonal	35 mm	44 mm	38 mm	32 mm	58 mm	0.350 kg
38255	Hexagonal	40 mm	50 mm	41 mm	36 mm	65 mm	0.460 kg
420204	Hexagonal	45 mm	61 mm	-	41 mm	76 mm	0.780 kg
420205	Hexagonal	50 mm	73 mm	-	46 mm	84 mm	0.990 kg
420206	Hexagonal	60 mm	82 mm	-	55 mm	98 mm	1,6 kg
38247	Conical	25 mm	32 mm	16 mm	25 mm	39 mm	0.14 kg